Smart Layers That Boost Comfort and Protect the Building
Thermal, Acoustic & Waterproofing
Correct insulation means comfort, energy efficiency and a longer building life. With the right material, the right detailing and the right installation on the envelope (roof/façade), floor slabs and wet areas, we cut heat loss, noise, and moisture/leak risk, for results that last.
What We Take On
Thermal Insulation: Façade, roof, floor slab and window/door junctions; thermal-bridge reduction, vapor-control layers, U-value optimization.
Acoustic Insulation: Impact- and airborne-sound reduction between walls/floors; floating screed, acoustic membranes, resilient ceiling hangers; door and installation acoustics.
Waterproofing: Wet areas (bathroom/WC/terrace), foundation/retaining walls, roof/terrace, balcony and expansion-joint detailing.
Thermal Bridge & Condensation Control: Solutions that prevent condensation risk at corners, beams, window reveals and service penetrations.
Material & Detail Engineering: Layer schedules, junction details, installation specifications and quantities.
Quality Control & Testing: Moisture measurement, flood testing, and thermal-camera inspection for leaks and thermal bridges.
Maintenance & Warranty: As-built documentation, a periodic inspection plan and fast response.
Sustainability & Efficiency
Energy Savings: Reduces heat loss/gain and heating-cooling loads, allowing smaller HVAC systems.
Material Selection: Low-VOC products, recyclable layers, and FSC/eco-friendly components.
Life-Cycle Cost: Durable detailing and easy maintenance lower the total cost of ownership.
Healthy Interiors: Vapor balance and ventilation continuity that reduce moisture and mold risk.
How We Work
Survey & Diagnosis
Current-condition analysis: thermal camera, moisture/heat hotspots, acoustic issues.
Solution Design
Layer build-up, thickness and material recommendations; junction details and 3D sections.
Execution Plan
Quantities, work program, site preparation and protection scenarios.
Execution
Surface preparation, primer/layer application, junction/chamfer/expansion-joint detailing, health & safety procedures.
Testing & Verification
Flood testing, adhesion/thickness checks, thermal and acoustic measurements.
Handover & Maintenance
As-built drawings, maintenance instructions and warranty documentation.
Example Projects
Frequently Asked Questions
It depends on the building envelope, budget and architectural constraints; we recommend whichever solution minimizes thermal bridging.
Let's Talk About Your Project
We listen to your needs and put together a clear proposal with the right budget and timeline.
Fill the Form, Let's Talk
Tell us about your project, we'll get back to you within 24 hours.